C-210X

C-210X System

OUR ALL-NEW DUAL 10” LINE ARRAY SYSTEM

The new C-210X line array system keeps the same design philosophies as the acclaimed C-205 and C-208 systems from Wharfedale Pro.

Portable, powerful and versatile line array solutions which are ideal for both touring and fixed installation applications.

Each C-210X element uses a pair of custom 10” Wharfedale Pro high- power low-frequency drivers, while the high frequencies are handled by a premium 3.0” titanium diaphragm, neodymium magnet compression driver coupled to a 100° x 10° waveguide.

The waveguide exit extends nearly to the top and bottom of the enclosure to create a continuous acoustical source - resulting in greatly reduced destructive interaction within the array.

Bi-amp and Passive modes

A switch on the C-210X input panel selects between either of two operating modes: Passive mode (single amplifier) or Bi- amp mode (separate low and high frequency amplifiers).

In Passive mode, the internal crossovers of the C-210X loudspeakers divide the audio signal into the separate frequency ranges for each driver. In Bi-amp mode separate (discrete) amplifiers can be used to power the low frequency and high frequency drivers.

The Versadrive series are ideal for passive & bi-amp mode operation and control.

● 2 x 10” LF drivers with 2.5” voice coils

●  1 x Neodymium HF compression driver with 3” voice coil

●  16Ω Impedance

●  Passive and Bi-amp operation modes

●  100° x 10° dispersion

●  HF : 90w Continuous / 180w Programme / 360w Peak

●  LF : 800w Continuous / 1600w Programme / 3200w Peak

●  Internal rigging system

●  15mm / 18mm plywood construction

●  Max SPL @1m (Passive mode) 138dB

Optimised Ground Stacking

C-210X rigging doubles up as an optimised ground stacking system, using the C-210XSUB subwoofer as a base.

Arrays of WLA-210X line array elements can be aimed downwards by as much as 10° to cover audience areas close to a stage, as well as upward by as much as 10° in order to better cover distant balcony seating areas.